Everyone

Josua Dietze

Ice Cream Sandwich

Needs ROOT access - read the full description !!

Note: This app does not support local installation with a downloaded APK.

PPP Widget 3 is a fundamentally re-written version of PPP Widget 2. It has all features of that earlier app; the main difference is that it supports several new modem connection variants - not just the old PPP !! The new ones - in case you are an expert - are NCM, ECM and QMI.
Also, it comes with its own native USB code, effectively backporting some bugfixes for Android's early USB API (pre 4.3).
This in turn made it possible to use asynchronous USB transfers throughout, which results in a noteable speed boost.

It was tested with newer Huawei modems like the E3272 and E3372. It should be able to work with most 3G/4G/LTE modems. Like with PPP Widget 2, you can also use classic cell phones with modem capabilities via Bluetooth.

THERE IS NO APP ICON !!

As with the predecessors, you CAN'T start this app by touching an icon or using a launcher. You have to place the WIDGET on your workspace to enable it. Make sure you know how to access WIDGETS on your device.

REQUIREMENTS (read carefully before complaining):

- Needs root access, with "SuperSU" app or Magisk
- For USB: needs USB host connection (with OTG adapter)
- For USB: needs external USB power

Regarding the last point: modems often draw more power than tablets or phones can deliver. Even if they do with full battery, there may be instabilities if the battery is drained.

I use a cheap OTG Y cable which can employ any generic micro USB power adapter to 'inject' power to the modem while plugged in. Much less drain on the battery !!

This app is free. There are no ads. It does not use the Internet itself. It does not access and transmit any user or device data. It does not monitor any content on the network connection it provides. If you don't trust my promises, simply do not install this.

Note that this app is intended to work around the limitations of common stock firmwares. It was NOT tested with custom ROMs where the developers are free to get rid of these limitations easily.

If this app does not work for you immediately, don't just complain. Report your problems at the support forum; there may be a chance for improvement. See "app website" for the link or go to
http://www.draisberghof.de/android/pppwidget3.html
需要root权限 - 阅读完整的说明！

注：此应用程序不支持本地安装了下载的APK。

PPP的Widget 3是一个从根本上重新编写的版本PPP的Widget 2.它具有较早的应用程序的所有功能;主要的区别是，它支持几种新的调制解调器连接形式 - 不只是旧的PPP！新的 - 如果你是一个专家 - 是NCM，ECM和QMI。
此外，它本身自带的原生USB代码，有效地向后移植为Android的早期USB API（预4.3）的一些错误修正。
这反过来又使人们有可能在整个使用异步USB传输，这会导致noteable的速度提升。

它与新华为的调制解调器，如E3272和E3372测试。它应该能够与大多数3G / 4G / LTE调制解调器的工作。像PPP的Widget 2，你也可以使用传统的手机通过蓝牙调制解调器功能。

没有应用程序图标！

如同前辈，你无法通过触摸图标或使用启动启动这个程序。你必须把WIDGET在您的工作空间来启用它。确保你知道如何访问您的设备上的小部件。

要求（抱怨前仔细阅读）：

- 需要root权限，与“SuperSU”应用程序或Magisk
- 对于USB：需要USB主机连接（带OTG适配器）
- 对于USB：需要外接USB电源

关于最后一点：调制解调器往往得出比平板电脑或手机可以带来更强大。即使他们以饱满的电池做，可能会有不稳定性，如果电池耗尽。

我使用的是廉价的OTG Y型电缆，可使用任何通用的微型USB电源适配器为“注入”接通调制解调器的电源，而在电池上。更何况漏堵塞！

这个应用程序是免费的。有没有广告。它不使用互联网本身。它不访问和发送任何用户或设备数据。它不监视它提供的网络连接上的任何内容。如果你不相信我的承诺，根本就没有安装此。

请注意，这个程序是为了解决普通股固件的限制。它不与其中开发者可以自由获得轻松摆脱这些限制的自定义光盘进行测试。

如果该应用程序不适合你立即工作，不要只是抱怨。报告在支持论坛的问题;可能有改善的机会。请参阅“应用程序网站”的链接，或进入
http://www.draisberghof.de/android/pppwidget3.html


\u4f7f\u7528\u84dd\u7259/ USB\u8c03\u5236\u89e3\u8c03\u5668\u4e0eWiFi\u7684\u53ea\u6709Android\u8bbe\u5907 - \u9605\u8bfb\u8bf4\u660e\uff01

PPP Widget 3

PPP Widget 3的最新版本

其他版本